I'm trying to bulk import a VG310 SCCP into CUCM 10.5.2 and am having an issue. I've tried everything I can think of but nothing works. I know I'm close because it takes the first entry in the csv and puts it in but then errors on any of the rest with the following error:
SKIGWC288264458(Record Number 2) 2036 DOMAIN NAME MAC Address already exists.
SKIGWC288264458(Record Number 3) 2036 DOMAIN NAME MAC Address already exists.
Based on that I am assuming it doesn't like something about the MAC address being the same in the Domain Name field in the csv. I've tried leaving the rest of the entries blank but it doesn't like that. I tried adding 000 to the end of it (the way it adds the AN name to the port) and then incrementing up from there (001,002,etc) but that just created 24 new gateways.
Any help is greatly appreciated. I've spent a lot of time messing with this. I would just put them in manually but I've got several VG350's to program as well and fear I will run into the same issue. I'd love to get it cleared up so as to automate the process somewhat.
I'm attaching a copy of the BAT I created for reference.
Thanks!
