RP/0/RSP0/CPU0:ios#adm sho ins ina sum
Fri Jun 5 11:29:49.914 UTC
Default Profile:
SDRs:
Owner
Inactive Packages:
disk0:asr9k-px-4.3.2.CSCut30136-1.0.0
RP/0/RSP0/CPU0:ios#adm ins activate disk0:asr9k-px-4.3.2.CSCut30136-1.0.0 sync$
Fri Jun 5 11:20:19.985 UTC
Install operation 143 '(admin) install activate
disk0:asr9k-px-4.3.2.CSCut30136-1.0.0 synchronous' started by user 'cisco' via
CLI at 11:20:20 UTC Fri Jun 05 2015.
Info: The following SMU is not being activated as it does not apply to any
Info: packages on the router:
Info:
Info: disk0:iosxr-infra-4.3.2.CSCut30136-1.0.0
Info:
Error: Cannot proceed with the activation as there are no packages to
Error: activate
Error: Suggested steps to resolve this:
RP/0/RSP0/CPU0:Jun 5 11:21:38.762 : instdir[255]: %INSTALL-INSTMGR-3-INSTALL_OPERATION_USER_ERROR : User error occurred during install operation 143. See 'show install log 143 detail' for more iError: - check the names of the packages being activated.
nformation.
Install operation 143 failed at 11:21:38 UTC Fri Jun 05 2015.
How should I do?
Thank you very much.
