06-03-2015 08:38 AM - edited 03-08-2019 12:23 AM
Hello everyone,
i have this problem on 2 switch 4503E
CORE01
%SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Rx power low warning; Operating value: -13.8 dBm, Threshold value: -9.9 dBm.
%SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Rx power low alarm; Operating value: -13.9 dBm, Threshold value: -13.9 d dBm.
4503E_CORE01#sh interfaces transceiver
Optical Optical
Temperature Voltage Tx Power Rx Power
Port (Celsius) (Volts) (dBm) (dBm)
--------- ----------- ------- -------- --------
Te1/1 23.9 3.26 -2.2 -14.0
4503E_CORE01#show inte te1/1 trans det
High Alarm High Warn Low Warn Low Alarm
Temperature Threshold Threshold Threshold Threshold
Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius)
--------- ------------------ ---------- --------- --------- ---------
Te1/1 24.1 75.0 70.0 0.0 -5.0
High Alarm High Warn Low Warn Low Alarm
Voltage Threshold Threshold Threshold Threshold
Port (Volts) (Volts) (Volts) (Volts) (Volts)
--------- --------------- ---------- --------- --------- ---------
Te1/1 3.26 3.60 3.50 3.10 3.00
Optical High Alarm High Warn Low Warn Low Alarm
Transmit Power Threshold Threshold Threshold Threshold
Port (dBm) (dBm) (dBm) (dBm) (dBm)
--------- ----------------- ---------- --------- --------- ---------
Te1/1 -2.2 1.6 -1.3 -7.3 -11.3
Optical High Alarm High Warn Low Warn Low Alarm
Receive Power Threshold Threshold Threshold Threshold
Port (dBm) (dBm) (dBm) (dBm) (dBm)
------- ----------------- ---------- --------- --------- ---------
Te1/1 -13.9 1.9 -1.0 -9.9 -13.9
CORE02
%SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Rx power low warning; Operating value: -13.5 dBm, Threshold value: -9.9 dBm.
%SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Rx power low warning; Operating value: -13.5 dBm, Threshold value: -9.9 dBm.
4503E_CORE02#sh interfaces transceiver
Optical Optical
Temperature Voltage Tx Power Rx Power
Port (Celsius) (Volts) (dBm) (dBm)
--------- ----------- ------- -------- --------
Te1/1 27.5 3.24 -2.3 -13.5
4503E_CORE02#show inte te1/1 trans det
High Alarm High Warn Low Warn Low Alarm
Temperature Threshold Threshold Threshold Threshold
Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius)
--------- ------------------ ---------- --------- --------- ---------
Te1/1 27.4 75.0 70.0 0.0 -5.0
High Alarm High Warn Low Warn Low Alarm
Voltage Threshold Threshold Threshold Threshold
Port (Volts) (Volts) (Volts) (Volts) (Volts)
--------- --------------- ---------- --------- --------- ---------
Te1/1 3.24 3.60 3.50 3.10 3.00
Optical High Alarm High Warn Low Warn Low Alarm
Transmit Power Threshold Threshold Threshold Threshold
Port (dBm) (dBm) (dBm) (dBm) (dBm)
--------- ----------------- ---------- --------- --------- ---------
Te1/1 -2.1 1.6 -1.3 -7.3 -11.3
Optical High Alarm High Warn Low Warn Low Alarm
Receive Power Threshold Threshold Threshold Threshold
Port (dBm) (dBm) (dBm) (dBm) (dBm)
------- ----------------- ---------- --------- --------- ---------
Te1/1 -13.5 1.9 -1.0 -9.9 -13.9
i only have 1 transceiver on both switch,i changed the fiber cord also the same issue.
Solved! Go to Solution.