Hello all,
I have AP 1702I.
but I should use AP's OS from Lightweight(PRESENT) to Autonomous(Future).
But I'm worried about whether it will installing properly, indeed.
I followed below URL's opinion.
http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
but I couldn't type "debug capwap console cli"
That is, there are a little different command compared other AP commands..
So, I will try step by step like below sentence that is summarized by me.
1. Delete OS
2. Configuring set IP_ADDR , DEFAULT_ROUTER and something right that.
3. Open the TFTP file.
4. Off the power and On while pressing the mode button.
5. Press until "button is pressed, wait for button to be released..." sentence appear.
6. If below picture is appeared, it will be successful I think...
How are you thinking about this solution..?
The reason why I make a question this topic is because I configured this procedure last month.
At that time, I failed this solution.. so I should be careful...
Please contact me.
Regards,
