I have CME 10.5 and CUC 10.5,newly installed. Everything seems to be working fine except that the MWI is not working. I have MWI turned on in each DNs as well as voicemail pilot number in the voice register global. I also created a dialpeer.
I have done the required work in telephony integration related in the CUC including ports, port groups etc. There are a few ports that are configured for MWIs. Everything looks ok but still MWI is not working. Voicemails are there in the test mailboxes.
Not knowing what went wrong, I decided to post here. If somebody could give me the checklist where I should be looking to resolve this issue,that would be great.
Thanks, Khanal
