06-05-2016 11:39 PM - edited 03-08-2019 06:04 AM
I have a cisco 3560 switch PoE, with cisco wireless access points connected to it. I got 9 access points out of 24 go off. I got the following log for all off ports.
3w6d: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/32: Power given, but Power Controller does not report Power Good
Show power inline command output is below.
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/32 auto off 0.0 n/a n/a 30.0
I reset the port by shut & noshut.
Reset the power by pow inline never & pow inline auto.
But link is still down.
What can I do next?
Solved! Go to Solution.