Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I have two Cisco 9500-40X-E switches with StackWise Virtual setup. They are running with Cisco IOS XE Fuji 16.9.3 image.Can I upgrade the images to IOS XE Gibraltar 16.12.2 directly? I have found the following steps from the Cisco website, but I w...
How to upgrade the firmware of Cisco C6807-XL switch? I have downloaded the new version "s2t54-ipservicesk9_npe-mz.SPA.155-1.SY1.bin" to tftp server. Is it the normal process as "copy tftp: bootdisk:"? Any special concerns I need to take before upgra...
Can anyone please let me know which Cisco switches supports VACL? I tried with 2950 with IOS 12.1(9)EA1, but it not supports. I don't think that upgarding IOS will support VACL. Isn't it?
I have a cisco 3560 switch PoE, with cisco wireless access points connected to it. I got 9 access points out of 24 go off. I got the following log for all off ports.
3w6d: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/32: Po...
Thanks Guys.
I did update the standby switch firmware via USB drive without disabling VSS set up. I did format the USB drive with FAT file system before copying the firmware to it. Then plugged the USB to the standby switch and boot it from USB at r...
Hi
It has VSS system set up and now primary switch got firmware upgraded but standby is not. I think copying the firmware to standby switch is some how failed and caused this issue. How can I upgrade the firmware of standby switch now while primary i...
Hi Can you please check the following and assist?
https://supportforums.cisco.com/discussion/13326296/configuring-radius-server-authenticating-specific-ssid
Hi Leo
Thank you.
Did the test. following are the results of all off ports. Suspecting cable faults and will arrange the cable inspection.
Interface Speed Local pair Pair length Remote pair Pair status
--------- ----- ---------- -------------...
