Greetings,
I am deploying UC VMs for a home practice lab on a UCS C200 M2 server platform. So far I've built a CUCM cluster (one PUB/one SUB) and a single Unity Connection VM. I ran into problems when I attempted to add an IM&P 10.5 VM to the cluster. After entering the configuration parameters the installation consistently fails the Network Connectivity Validation test. I've verified the Static Network configuration settings (host name, IP address, etc) of the First Node device which is the CUCM PUB. The validation gets to part 2 of 2 and fails at the 98% mark because connectivity to the First Node device can not be verified even though I'm able to ping the device. I initially had this problem when I was installing the SUB but was eventually able to deploy it. I don't understand what is going on during the validation that the IM&P installer can not find the CUCM PUB. Is there something that needs to be configured on the PUB to make it visible to the validation process? Could it be the initial setup of the OVF template parameters (where the type of deployment is specified - e.g. # of users)?
Thanks
