I have a module A9K-MPA-4X10GE in slot 0/0/0 which the Oper State : DISABLED anyone has been there to help me to figured this out.
any help will be appreciated.
Please see below my output.
*****************************************************
RP/0/RSP0/CPU0:us-fmt-core2.rtr#show platform
Tue May 24 12:37:44.662 UTC
Node Type State Config State
-----------------------------------------------------------------------------
0/RSP0/CPU0 ASR9001-RP(Active) IOS XR RUN PWR,NSHUT,MON
0/0/CPU0 ASR9001-LC IOS XR RUN PWR,NSHUT,MON
0/0/0 A9K-MPA-4X10GE DISABLED PWR,NSHUT,MON
0/0/1 A9K-MPA-20X1GE OK PWR,NSHUT,MON
RP/0/RSP0/CPU0:us-fmt-core2.rtr#
RP/0/RSP0/CPU0:us-fmt-core2.rtr#show platform summary location all
Tue May 24 12:41:50.019 UTC
-------------------------------------------------------------------------------
Platform Node : 0/RSP0/CPU0 (slot 0)
PID : ASR9001-RP
Card Type : ASR 9001, Route Switch Processor with 8GB memory
VID/SN : V01 / FOC1814NJ4J
Oper State : IOS XR RUN
Last Reset : User Initiated reload Process: reload
: Tue May 17 15:36:43 2016
Configuration : Power is enabled
Bootup enabled.
Monitoring enabled
Rommon Ver : Version 2.03(20131022:110718)
IOS SW Ver : 5.3.1
Main Power : Power state Enabled. Estimate power 50 Watts of power requi red.
Faults : N/A
-------------------------------------------------------------------------------
Platform Node : 0/0/CPU0 (slot 2)
PID : ASR9001-LC
Card Type : ASR 9001, Modular Line Card
VID/SN : V01 / FOC1814NJF3
Oper State : IOS XR RUN
Last Reset : Reloading managed node Process: insthelper
: Tue Jan 5 15:55:29 2016
Configuration : Power is enabled
Bootup enabled.
Monitoring enabled
Rommon Ver : Version 2.03(20131022:111059)
IOS SW Ver : 5.3.1
Main Power : Power state Enabled. Estimate power 330 Watts of power requ ired.
Faults : N/A
-------------------------------------------------------------------------------
Platform Node : 0/0/0 (slot 2, bay 0)
PID :
Card Type : ASR 9000 4-port 10GE Modular Port Adapter
VID/SN : /
Oper State : DISABLED
Last Reset : Mon May 23 08:49:21 2016
Up Time : 00:00:00
Configuration : Power is enabled
Bootup enabled
Monitoring enabled
FPD SW Rev(s) :
-------------------------------------------------------------------------------
Platform Node : 0/0/1 (slot 2, bay 1)
PID : A9K-MPA-20X1GE
Card Type : ASR 9000 20-port 1GE Modular Port Adapter
RP/0/RSP0/CPU0:us-fmt-core2.rtr#
RP/0/RSP0/CPU0:us-fmt-core2.rtr#show diag
Tue May 24 12:51:50.677 UTC
NODE module 0/RSP0/CPU0 ASR 9001, Route Switch Processor with 8GB memory
MAIN: board type 0x100401
S/N: FOC1814NJ4J
Top Assy. Number: 00-0000-00
PID: ASR9001-RP
HwRev (UDI_VID): V01
Chip HwRev: V1.0
New Deviation Number: 0
CLEI:
Board State : IOS XR RUN
PLD: Motherboard: N/A, Processor version: 0x8023 (rev: 2.0), Power: N/A
MONLIB: QNXFFS Monlib Version 3.3
ROMMON: Version 2.03(20131022:110718) [ASR9K ROMMON]
Board FPGA/CPLD/ASIC Hardware Revision:
IntCtrl : V0.0
USB0 : V17.0
ClkCtrl : V0.0
CPUCtrl : V0.0
MLANSwitch : V0.0
EOBCSwitch : V2.0
LIU : V0.0
YDTI : V0.0
PHY : V0.0
CBC (active partition) : v22.114
CBC (inactive partition) : v22.114
NODE module 0/0/CPU0 ASR 9001, Modular Line Card
MAIN: board type 0xf10402
S/N: FOC1814NJF3
Top Assy. Number: 00-0000-00
PCA: 73-14312-05
PID: ASR9001-LC
HwRev (UDI_VID): V01
Chip HwRev: V1.0
New Deviation Number: 0
CLEI:
Board State : IOS XR RUN
PLD: Motherboard: N/A, Processor version: 0x8023 (rev: 2.0), Power: N/A
ROMMON: Version 2.03(20131022:111059) [ASR9K ROMMON]
Board FPGA/CPLD/ASIC Hardware Revision:
NP0 : V4.194
NP1 : V4.194
FIA0 : V0.2
FIA1 : V0.2
X-Bar : V1.5
CPUCtrl : V1.18
FabArbiter : V0.0
PortCtrl : V1.18
PHYCtrl : V1.18
ClkCtrl : V1.18
PHY0 : V0.4(HwRev) V8.0(FwRev) V8.0(SwRev)
DBCtrl : V2.10
Power Sequencer0 : V0.0
Power Sequencer1 : V0.0
Power Sequencer2 : V0.0
Modular Linecard Daughter board : V1.0
CBC (active partition) : v23.114
CBC (inactive partition) : v23.114
SPA 0/0/0 : ASR 9000 4-port 10GE Modular Port Adapter
MAIN: board type 0237
68-3730-08 rev A0
dev 143395
S/N FOC1818NFHB
PCA: 73-13150-08 rev N/A
PID: A9K-MPA-4X10GE
VID: V05
CLEI: IPUIBRDRAE
Board State : DISABLED
FPD Software Revision:
SPA 0/0/1 : ASR 9000 20-port 1GE Modular Port Adapter
MAIN: board type 0235
68-3959-06 rev A0
dev 139030
S/N FOC1801N6D2
PCA: 73-13152-04 rev N/A
PID: A9K-MPA-20X1GE
VID: V02
CLEI: IPUIBVTRAA
Board State : OK
FPD Software Revision:
RP/0/RSP0/CPU0:us-fmt-core2.rtr#
