hi all
i am trying to use this command
router#ping <ip address> repeat 10000 in EIGRP scenario
Router#ping 10.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/1 ms
Router#ping 10.1.1.1 repeat 10000
^
% Invalid input detected at '^' marker.
both in packet tracer and Gns3 but i get that
what could be the problem
packet tracer i checked with most of the routers then with gns3 i checked with 3600
thank you in advance
