cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

CUCM upgrade issue

Hello!

I cannot upgrade from 11.0.1.20000-2 to 11.0.1.22900-14.

First I got the error saying that there is not enough disk space in the common partition to perform the upgrade (referring to CSCul50066).

Then I used ciscocm.free_common_space_v1.3.k3.cop.sgn to free up some space but it failed as well with the error message:

.. the cop file has not been installed because you have more than 25 gb of diskspace in /common...

That was confusing!

Then I experimented with the  LogPartitionHigh/Low WatermarksExceeded alerts in RTMT as advised in CSCul50066. No success again.

So after all, I came to the situation that the upgrade process is just hanging, the only thing I can do is to cancel it.

The CLI says the following:

=====================

admin:utils system upgrade status

An error has occured but no messages on the upgrade failure are available . Please review the install logs for additional details.

Upgrade status: Failed
Upgrade file: UCSInstall_UCOS_11.0.1.22900-14.sgn.iso
Upgrade log: install_log_2016-09-26.05.39.27.log

======================

Could you please advise?

Who Me Too'd this topic