We have a small Service provider network with a combination of ASR 9006 and ASR 920 routers. We have MPLS configured on the backbone network. We have a customer that has an external Ethernet circuit from London that is connected to a port on the ASR 9006 - they want to use this circuit to transport 2 VLANS into our network. One VLAN (VLAN 100) will go to an ASR 920 at location A and the other VLAN (VLAN 200) will go to an ASR 920 router at location B. At each location (A & B). I've uploaded a simplified drawing showing the pertinent routers and layout.
If we were going between 2 ASR 920s, I think it would be pretty easy, you can add multiple service instances to an interface. but since the interface that the external customer circuit connects to is on an ASR 9006 (IOS XR) I'm not sure how to configure the xconnect between the ASR 9006 and the ASR 920 routers. How do I get the ASR 9006 to support 2 VLANS and distribute them to the ASR 920s?
Thanks in advance for any help - it is hard to find examples of configurations where there is a combination of IOS XR and IOS XE routers....
