Hi
we have access swtiches: 2960-s and 2960-x.
Same settings, but due to diff platforms have diff ver IOS (c2960s-universalk9-mz.152-2.E4 and c2960x-universalk9-mz.150-2a.EX5).
So from 2960-X at syslog we have in syslog:
%AUTHMGR-5-SUCCESS:
%DOT1X-5-SUCCESS:
%DOT1X-5-FAIL:
and so on
But at 2960-S I didt see this messages.
debug authentication events or debug dot1x events didnt a trick.
So how I can enable this messages on 2960-s?
