Dear support,
I've bought 3 new switches SG300-10MPP for our Ruckus system. We have Ruckus R710, that can support 802.3at and SG300 can do this too.
But we can't setup this AP run in 802.3at mode, it's only running in 802.3af mode.
In Ruckus Document, we found the AP only running in 802.3 at if the switch supports LLDP and Power-over-MDI dot3-tlv for 802.3at working.
So, please help me to check,does SG300 can support Power-over MDI,
Here is result from wireshark capture,
- Multicast LLDP packet from SG300
- Multicast LLDP packet from Ruckus R710
Thanks alot
