08-30-2016 02:09 AM - edited 03-08-2019 07:13 AM
Hello,
I have a pair of n5k, with 10* n2k dual homed.
I have a Po for a server connected on 2 different n2k, but when I try to add vPC ID the Nexus reject my command.
NEX-A# sh port-ch sum
201 Po201(SD) Eth LACP Eth1/23(D) Eth1/24(D)
303 Po303(SD) Eth LACP Eth104/1/11(D) Eth104/1/12(D) Eth105/1/11(D)
Eth105/1/12(D)
The command works for n5k ports but not n2k :
NEX-A# sh run int po201
interface port-channel201
description SERV-00-01
switchport access vlan 112
speed 10000
vpc 201
NEX-A(config)# int po303
NEX-A(config-if)# vpc 303
ERROR: Operation failed: [vPC already exists]
Here is my show vpc, no vpc 303, but one ID per port and a total of 508 vpc whereas I configured only 2 vpc :
NEX-A# sh vpc
Legend:
(*) - local vPC is down, forwarding via vPC peer-link
vPC domain id : 5
Peer status : peer adjacency formed ok
vPC keep-alive status : peer is alive
Configuration consistency status : success
Per-vlan consistency status : success
Type-2 consistency status : success
vPC role : primary
Number of vPCs configured : 508
Peer Gateway : Disabled
Dual-active excluded VLANs : -
Graceful Consistency Check : Enabled
Auto-recovery status : Enabled (timeout = 240 seconds)
vPC Peer-link status
---------------------------------------------------------------------
id Port Status Active vlans
-- ---- ------ --------------------------------------------------
1 Po1 up 8,104,112,208,297-299,490-492,560-572,580,590,2000
,2008,2104
vPC status
----------------------------------------------------------------------------
id Port Status Consistency Reason Active vlans
------ ----------- ------ ----------- -------------------------- -----------
201 Po201 down* Not Consistency Check Not -
Applicable Performed
102400 Eth101/1/1 down* Not Consistency Check Not -
Applicable Performed
102401 Eth101/1/2 down* Not Consistency Check Not -
Applicable Performed
102402 Eth101/1/3 down* Not Consistency Check Not -
Can you help me ?
Solved! Go to Solution.