01-11-2017 06:03 PM - edited 07-05-2021 06:20 AM
We are currently in the phase of deploying new access points at a remote site. The site has had AP 3500s till now. It has no issues with clients connecting over a radius enabled SSID. Both new and old access points are connected to WS3650-24PD switch with SW version 03.06.05E.
The WLC is Cisco 5508 with version 8.2.141.0 updated in December last year.
Am I missing anything obvious? The client just do not get the DHCP enabled address and end up getting a self assigned (169.254.x.x) address with no network connectivity. Any help around this would be appreciated.
Any of you able to get Flex connect working with new AP2802 & radius enabled SSID? Any inputs/suggestions will be greatly appreciated.
Thanks.