cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Cisco VCS message in Event Log

Steve Deslandes
Level 1
Level 1

Hello,

I am managing alot of VCS's (Version x8.8.2) and quite a few of them have the following messages in the event log:

2016-09-28T22:36:27.879-04:00 management: Level="INFO" Detail="NetworkLimits processing" Command="status" Category="all" Limits="None" UTCTime="2016-09-29 02:36:27,879"

The above message seems to appear every minute and is sometimes followed by the following:

2016-09-28T22:31:49.464-04:00 management: Level="INFO" Detail="NetworkLimits processing" Command="refresh" Category="zones" Limits="LimitData(connection_rate=25, connection_burst=8, traffic_percent=50, traffic_burst=20)" UTCTime="2016-09-29 02:31:49,463"
2016-09-28T22:31:49.455-04:00 management: Level="INFO" Detail="NetworkLimits processing" Command="delete" Category="turn" Limits="LimitData(connection_rate=10, connection_burst=0, traffic_percent=15, traffic_burst=10)" UTCTime="2016-09-29 02:31:49,455"
2016-09-28T22:31:49.433-04:00 management: Level="INFO" Detail="NetworkLimits processing" Command="refresh" Category="sip" Limits="LimitData(connection_rate=15, connection_burst=10, traffic_percent=30, traffic_burst=10)" UTCTime="2016-09-29 02:31:49,432"
2016-09-28T22:31:49.413-04:00 management: Level="INFO" Detail="NetworkLimits processing" Command="refresh" Category="sip" Limits="LimitData(connection_rate=15, connection_burst=10, traffic_percent=30, traffic_burst=10)" UTCTime="2016-09-29 02:31:49,412"
2016-09-28T22:31:45.256-04:00 management: Level="INFO" Detail="NetworkLimits processing" Command="refresh" Category="media" Limits="LimitData(connection_rate=0, connection_burst=0, traffic_percent=85, traffic_burst=10)" UTCTime="2016-09-29 02:31:45,256"
2016-09-28T22:31:45.248-04:00 management: Level="INFO" Detail="NetworkLimits processing" Command="delete" Category="zones" Limits="LimitData(connection_rate=25, connection_burst=8, traffic_percent=50, traffic_burst=20)" UTCTime="2016-09-29 02:31:45,246"
2016-09-28T22:31:45.231-04:00 management: Level="INFO" Detail="NetworkLimits processing" Command="delete" Category="turn" Limits="LimitData(connection_rate=10, connection_burst=0, traffic_percent=15, traffic_burst=10)" UTCTime="2016-09-29 02:31:45,230"
2016-09-28T22:27:55.668-04:00

management: Level="INFO" Detail="NetworkLimits processing" Command="status" Category="all" Limits="None" UTCTime="2016-09-29 02:27:55,668"

Would anybody know what this message means? I don't have any specific alarms active and starting to get concerned since I see it on a few of my VCS's.

Thank you all for your assistance

Who Me Too'd this topic