07-06-2017 09:22 AM - edited 03-18-2019 01:16 PM
Hello All,
I've been messing around in the ce9 environment to see if it's set to send out to our users across campus and I notice something odd in the settings. It seems aa though there is no more administrative lockout when accessing the CODEC in the touch panel or while using the remote and this will give our users the potential to factory reset the system their using. I can't see any way in the web server to enable this feature that was always present in ce8 and others.
Does anyone here or in cisco know if this will be addressed in ce9? Or is there something I'm overlooking in the configuration that will allow me to block users from accessing this information?
Below is a reference image taken from an SX10 CODEC running ce9.1.2. But this issue is also present on the SX20, SX80, MX200-800, and SparkRoom Kits i have here in my office.
Solved! Go to Solution.