Hi!
I am trying to install Windows Server 2012 R2 on a Cisco c220 m5sx. It is in non managed mode and running CIMC 3.1(2b). It is speced with the onboard Cisco 12G Modular Raid Controller with 2GB cache (max 16 drives) (MRAID) controller. There are 4 installed physical drives, each 1.8 TB. I have created a raid 10 virtual drive using all 4 physical drives and configured it as a boot drive. See the linked photo. 
I am trying to install windows via an iso mapped to the KVM cd drive.
Inside the windows installer I see no drives to install too. Using a command prompt diskpart list disk shows zero drives. I have tried using drvload to install multiple drivers from the ucs-cxxx-drivers-windows.3.1.2b cd including all of the drivers in the LSI folder. After using drvload and getting a success diskpart rescan shows no changes.
Has anyone run into this problem before? I would love some help. What do I need to install Windows 2012R2 on the onboard raid controller? Thanks.
Andrew
