KABZ1016#sh run | i ntp
ntp source Vlan260
ntp server 10.162.251.72
ntp server 10.162.251.71
KABZ1016#
KABZ1016#sh ntp status
Clock is unsynchronized, stratum 16, no reference clock
nominal freq is 250.0000 Hz, actual freq is 250.0000 Hz, precision is 2**10
ntp uptime is 16310500 (1/100 of seconds), resolution is 4000
reference time is 00000000.00000000 (00:00:00.000 GMT Mon Jan 1 1900)
clock offset is 0.0000 msec, root delay is 0.00 msec
root dispersion is 0.58 msec, peer dispersion is 0.00 msec
loopfilter state is 'NSET' (Never set), drift is 0.000000000 s/s
system poll interval is 64, never updated.
KABZ1016#sh ntp ass
address ref clock st when poll reach delay offset disp
~10.162.251.72 10.162.251.71 2 49 64 377 0.996 3567718 1.923
~10.162.251.71 .LOCL. 1 45 64 7 0.997 3567717 1.692
* sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured
KABZ1016#
KABZ1016#ping 10.162.251.71
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.162.251.71, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms
KABZ1016#ping 10.162.251.72
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.162.251.72, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Please help me to resolve this, i have attached debugs logs too
