Hi Friends,
We are planning to Replace our Core Switch (C3750- 2 Nos, configured with HSRP) with Nexus N9K-C9372TX (2 Nos.).
Existing core switch (C3750) configurations are mentioned below.
01. Network Attached Storage (Net App) Configuration. NAS having two controller, First Controller is connected to First Core Switch & Second Controller is connected to Second Core Switch Respectively (and this is VLAN 12 & each both switch vlan having ip. No HSRP configuration)
02. VMWare EsXi 6.0 (2 Hosts). each host is connected to both switch (this is on Vlan 6) and HSRP is configured for VLAN 6 b/w two core switches.
03. Trunk Link (EtherChannel) b/w Two Core Switches for HA.
04. Trunk Link for EDGE Switches. Edge switch is connected with both Core switches and make 1st Core Switch as Root Bridge and 2nd as BDR.
So to increase network performance now we are planning to replace existing core switch with Nexus N9K-C9372TX, unfortunately we are not familiar with these Data Center switch.
Kindly guide us to complete our core switch change over with Nexus.
Any reference or guidance is very much appreciated.
Regards,
SAMED
asamedt@gmail.com
+971 56853 6364
