08-29-2018 03:29 AM - edited 03-05-2019 10:53 AM
Hi All!
Recently i bought Cisco c1111-8P. The data sheet says:
But in console:
Router#show power inline gigabitEthernet 0/1/0 detail Interface Gi0/1/0: inline power not supported Router#show power inline gigabitEthernet 0/1/1 detail Interface Gi0/1/1: inline power not supported Router#show power inline gigabitEthernet 0/1/2 detail Interface Gi0/1/2: inline power not supported Router#show power inline gigabitEthernet 0/1/3 detail Interface Gi0/1/3: inline power not supported Router#show power inline gigabitEthernet 0/1/4 detail Interface Gi0/1/4: inline power not supported Router#show power inline gigabitEthernet 0/1/5 detail Interface Gi0/1/5: inline power not supported Router#show power inline gigabitEthernet 0/1/6 detail Interface Gi0/1/6: inline power not supported Router#show power inline gigabitEthernet 0/1/7 detail Interface Gi0/1/7: inline power not supported
And:
Router#show power Main PSU : Configured Mode : N/A Current runtime state same : N/A PowerSupplySource : External PS POE Module : Configured Mode : N/A Current runtime state same : N/A Total power available : 0 Watts
Hardware:
Router#show inventory +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ INFO: Please use "show license UDI" to get serial number for licensing. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ NAME: "Chassis", DESCR: "Cisco C1111-8P Chassis" PID: C1111-8P , VID: V01 , SN: FGL2222944Q NAME: "Power Supply Module 0", DESCR: "External Power Supply Module" PID: PWR-12V , VID: V01 , SN: JAB0929092D NAME: "module 0", DESCR: "Cisco C1111-8P Built-In NIM controller" PID: C1111-8P , VID: , SN: NAME: "NIM subslot 0/0", DESCR: "Front Panel 2 port Gigabitethernet Module" PID: C1111-2x1GE , VID: V01 , SN: NAME: "NIM subslot 0/1", DESCR: "C1111-ES-8" PID: C1111-ES-8 , VID: V01 , SN: NAME: "module R0", DESCR: "Cisco C1111-8P Route Processor" PID: C1111-8P , VID: V01 , SN: FOC22198NGF NAME: "module F0", DESCR: "Cisco C1111-8P Forwarding Processor" PID: C1111-8P , VID: , SN:
How can this be?
Cisco placed c1100 Series Router in Enterprise segment ( 0_0 ), and w/o SmartNet i can`t get answer from TAC.
In the issue i try buy new device with necessary to me feature, but this feature not in this device, and Cisco said: "Buy our SmartNet too, and we answered about your device is not supported feature" .....