09-04-2018 03:23 AM
Hi Everybody,
We got the below message after reloading on Nx3548.
Switch %AFM-2-AFM_TCAM_UTIL_ABOVE_THRESHOL
D: sup tcam utilization has gone above the threshold of 90% on ASIC id 0
Switch# show hardware profile tcam region
sup size = 48
vacl size = 640
ifacl size = 400
qos size = 192
rbacl size = 0
span size = 0
racl size = 1536
e-racl size = 256
e-vacl size = 640
qoslbl size = 0
ipsg size = 0
arpacl size = 0
ipv6-racl size = 0
ipv6-e-racl size = 0
ipv6-sup size = 0
ipv6-qos size = 0
nat size = 256
e-qos size = 64
pbr size = 0
ipv6-pbr size = 0
copp size = 64
It's appreciated if any advice. Thanks.
Best Wishes,