10-18-2018 02:08 PM
I am using a cisco 2811 router that has the fa0/0 and 0/1 ports configured for internet.
I am trying to config int fa0/2/0 which is an add-on card for network connectivity and when I try to give the port an ip address, this is the message I get:
RT1LAB(config)#int fa0/2/0
RT1LAB(config-if)#ip address 192.168.1.62 255.255.255.0
% IP addresses may not be configured on L2 links.
What does that mean? Thanks