Hi All,
Per this link, the GLC-SX-MMD should be compatible with the ISR4321/K9
https://www.cisco.com/c/en/us/products/routers/4000-series-integrated-services-routers-isr/relevant-interfaces-and-modules.html
However, this is the error that I receive:
000117: *Nov 16 21:31:00.146 UTC: %TRANSCEIVER-3-NOT_SUPPORTED: SIP0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled
I have tried another GLC-SX-MMD module and the results are the same. I have tried the following IOS versions:
isr4300-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bin
isr4300-universalk9.03.16.07b.S.155-3.S7b-ext.SPA.bin
No luck with either. I have tried a GLC-LH-SMD and it works fine. What could the issue be with the GLC-SX-MMD modules? The GLC-SX-MMD modules do show up in inventory:
NAME: "subslot 0/0 transceiver 0", DESCR: "GE SX"
PID: GLC-SX-MMD , VID: , SN: FNS17110D30
They also work in another Cisco device. What am I missing?
Thanks in advance!
