Hi all,
Working through AnyConnect configuration and coming across two issues. A remote test PC cannot connect with error:
"The VPN connection was started by a remote desktop user whose remote console has been disconnected. It is presumed the VPN routing configuration is responsible for the remote console disconnect. The VPN connection has been disconnected to allow the remote console to connect again. A remote desktop user must wait 90 seconds after VPN establishment before disconnecting the remote console to avoid this condition."
I cannot see how this is a routing issue, any help would be appreciated.
Attached is sanitized config.
Note I can connect from the inside interface with no issues.
Thank you,
Steven
