Hello,
I'm setting up a new UCS chassis with some B200M5 blades VIC1440.
Connecting these blades for boot on san on VNX backend worked with no issue and setup of esxi 6.5 worked perfectly.
Just facing right now an issue for connecting those blades to VPLEX SAN. I've spend lot of time searching for an answer on my issue with no succes. Might be related to Cisco directly so I'm trying here ..... here is my problem :
UCS 4.0.4c bundle installed
B200M5 ESXi 6.5 Custom Cisco installed with boot on san.
When scannign HBA to connect VPLEX here is what I got :
2019-08-16T14:34:30.233Z cpu8:66287)ALERT: LinScsi: SCSILinuxProcessCompletions:855: Error BytesXferred > Requested Length but HOST_OK/DEVICE_GOOD!vmhba = vmhba2, Driver Name = fnic, Requested length = 66, Resid = 512
2019-08-16T14:34:30.233Z cpu8:66287)ALERT: LinScsi: SCSILinuxProcessCompletions:855: Error BytesXferred > Requested Length but HOST_OK/DEVICE_GOOD!vmhba = vmhba2, Driver Name = fnic, Requested length = 66, Resid = 512
2019-08-16T14:34:30.233Z cpu8:66287)ALERT: LinScsi: SCSILinuxProcessCompletions:855: Error BytesXferred > Requested Length but HOST_OK/DEVICE_GOOD!vmhba = vmhba2, Driver Name = fnic, Requested length = 66, Resid = 512
2019-08-16T14:34:30.233Z cpu8:66287)ALERT: LinScsi: SCSILinuxProcessCompletions:855: Error BytesXferred > Requested Length but HOST_OK/DEVICE_GOOD!vmhba = vmhba2, Driver Name = fnic, Requested length = 66, Resid = 512
2019-08-16T14:34:30.233Z cpu16:65584)ALERT: LinScsi: SCSILinuxProcessCompletions:855: Error BytesXferred > Requested Length but HOST_OK/DEVICE_GOOD!vmhba = vmhba1, Driver Name = fnic, Requested length = 66, Resid = 512
2019-08-16T14:34:30.234Z cpu16:65584)ALERT: LinScsi: SCSILinuxProcessCompletions:855: Error BytesXferred > Requested Length but HOST_OK/DEVICE_GOOD!vmhba = vmhba1, Driver Name = fnic, Requested length = 66, Resid = 512
2019-08-16T14:34:30.234Z cpu16:65584)ALERT: LinScsi: SCSILinuxProcessCompletions:855: Error BytesXferred > Requested Length but HOST_OK/DEVICE_GOOD!vmhba = vmhba1, Driver Name = fnic, Requested length = 66, Resid = 512
2019-08-16T14:34:30.234Z cpu16:65584)ALERT: LinScsi: SCSILinuxProcessCompletions:855: Error BytesXferred > Requested Length but HOST_OK/DEVICE_GOOD!vmhba = vmhba1, Driver Name = fnic, Requested length = 66, Resid = 512
Talking about the fnic driver, which is currently running to last last version present in the compatibility table :
vmkload_mod module information
input file: /usr/lib/vmware/vmkmod/fnic
Version: Version 1.6.0.50, Build: 2494585, Interface: 9.2 Built on: Mar 14 2019
Build Type: release
License: GPLv2
VIC1440 firmware is currently set to 5.0(3c).
Does anyone already faced this issue ? Is it FNIC/VIC related ?
Many thanks,
Best regards
