11-12-2019 12:38 AM - last edited on 01-09-2024 12:03 AM by Translator
Hi All,
With the 89x routers going end of sale I am trying to setup my 1st ISR-C1113 router using 4G LTE to for internet connectivity. I can only get the cellular interface to to apply for an IP address if I ping 8.8.8.8. Until then the cellular profile remains inactive.
Here are my settings:
interface Cellular0/2/0
ip address negotiated
ip nat outside
dialer in-band
dialer idle-timeout 0
dialer-group 1
pulse-time 1
controller Cellular 0/2/0
lte sim data-profile 1 attach-profile 1 slot 0
lte modem link-recovery rssi onset-threshold -110
lte modem link-recovery monitor-timer 20
lte modem link-recovery wait-timer 10
lte modem link-recovery debounce-count 6
I have set the APN with the following command:
cellular 0/2/0 lte profile create 1 wap.my-isp.co.uk
After powering up and waiting for the router to recognise the SIM it won't bring the profile into an active state. "show cellular 0/2/0 all" gives the following result:
Solved! Go to Solution.