06-10-2020 06:59 AM - edited 06-10-2020 06:59 AM
My team is working to deploy a pair of FPR2110-ASA-K9 in an active/standy, single mode configuration and we want to manage via the ASA.
During initial setup we found that certain configurations are only available using FXOS, such as enabling interfaces and speed/duplex settings, this is leading us to believe that the firewalls are running in platform mode instead of appliance mode which is supposed to be default.
There is documentation on how to change between platform and appliance mode using the fxos command but this is not showing up on the firewall asa console as a recognized command. So it seems we're running in platform mode when we need appliance mode, and the 'fxos' command or 'show fxos' commands are not functional.
Code version is cisco-asa-fp2k.9.12.3.12.SPA
Thank you