Hi,
I'm trying to create a raid1 config on an UCS managed C240M5 server with 240GB SATA M.2 disks.
I have done the same as described in this thread:
https://community.cisco.com/t5/unified-computing-system-blogs/how-to-boot-esxi-on-ucs-m2-hwraid-boot-optimized-m-2-raid/ba-p/3999088
But when I apply my service profile to a rack server, I get an error that RAID mode needs a key.
Has anyone been able to create a raid1 config on m.2 sata disks used for ESXi boot?
Best Regards
Bo
