10-05-2021 10:43 PM
Hi. I would like to ask how to configure an EtherChannel/Port-Channel on a router to switch connections. I'm familiar with LACP and PagP configuration(Layer 2 switch to Layer 2 switch and Multilayer Switch to Multilayer Switch.) However, on the router's physical interface the only available command for EtherChannel/Port-Channel is "channel-group [group number]". To solve this problem I came up with an idea by manually configuring the EtherChannel using the mode on-on(don't know the right term for it so I just call it mode on-on) but this raises another problem for me. The first is I don't know how to configure a mode on-on and how to verify if the EtherChannel/Port-Channel is working properly. Second, there is no mode option in the router's physical interface. Also, I have questions I would like to clarify regarding EtherChannel/Porth-Channel.
regards
Jorrie
Solved! Go to Solution.