Hi friends
I have a 9300-48P switch. After repeated power outages, my device crashes and can no longer boot correctly.
During boot process, below logs appear on CMD and then switch reloads:
Jan 23 10:50:03.731: %PMAN-3-PROCHOLDDOWN: R0/0: The process cmand has been helddown (rc 134)
Jan 23 10:50:03.873: %PMAN-0-PROCFAILCRIT: R0/0: pvp: A critical process cmand has failed (rc 134)
Jan 23 10:50:03.927: %PMAN-3-RELOAD_RP: R0/0: pvp: Reloading: Switch will be reloaded
Chassis 0 reloading, reason - Non participant detected
Jan 23 10:50:04.641: %PMAN-5-EXITACTION: F0/0: pvp: Process manager is exiting: reload fp action requested
Jan 23 10:50:05.998: %PMAN-5-EXITACTIONvp: Process manager is exiting: Critical process cmand fault on rp_0_0 (rc=134)
I only have access to ROMMON mode and I've tried:
- Emergency Install with USB Flash
- IOS cat9k_iosxe.17.03.04.SPA.bin and cat9k_iosxe.17.03.03.SPA.bin
- common Boot command : boot flash: Image. bin
After Emergency Install, boot fails and reloads Repeatedly.
Do you have any solution to this problem?
