I have two new 9800-40 controllers running 17.06.03
One chassis set to to number 1 priority 2 and the other is number 2 priority 1.
When they are booted at the same time, eventually dual-active recovery is triggered and one chassis goes to active recovery mode. I'll add the show romvar outputs of both controllers.This is the log of the chassis that goes to recovery mode:
*Aug 30 22:37:55.442: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet0/0/0, changed state to up
*Aug 30 22:37:56.441: %LINK-3-UPDOWN: Interface Port-channel36, changed state to up
*Aug 30 22:37:57.441: %LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel36, changed state to up
*Aug 30 22:37:57.442: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan550, changed state to up
*Aug 30 22:37:59.603: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI_LEGACY created succesfully
*Aug 30 22:37:59.609: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI_LEGACY has been generated or imported by pki-sudi
*Aug 30 22:37:59.625: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI_LEGACY0 created succesfully
*Aug 30 22:38:01.574: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI created succesfully
*Aug 30 22:38:01.579: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI has been generated or imported by pki-sudi
*Aug 30 22:38:01.596: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI0 created succesfully
*Aug 30 22:38:12.556: %CALL_HOME-6-CALL_HOME_ENABLED: Call-home is enabled by Smart Agent for Licensing.
*Aug 30 22:38:26.646: %RIF_MGR_FSM-6-RMI_LINK_UP: Chassis 1 R0/0: rif_mgr: The RMI link is UP.
*Aug 30 22:38:26.646: %STACKMGR-1-DUAL_ACTIVE_CFG_MSG: Chassis 1 R0/0: stack_mgr: Dual Active Detection link is available now
*Aug 30 22:38:26.750: %RIF_MGR_FSM-6-GW_REACHABLE_ACTIVE: Chassis 1 R0/0: rif_mgr: Gateway reachable from Active
Aug 30 22:38:48.411: %PKI-6-AUTHORITATIVE_CLOCK: The system clock has been set.
Aug 30 22:47:26.160: %RIF_MGR_FSM-6-RMI_LINK_DOWN: Chassis 1 R0/0: rif_mgr: The RMI link is DOWN.
Aug 30 22:47:26.160: %STACKMGR-1-DUAL_ACTIVE_CFG_MSG: Chassis 1 R0/0: stack_mgr: Dual Active Detection links are not available anymore
WLC2#Ewlc: triggered dual-active recovery,setting hostname to
% Hostname "WLC2(RECOVERY-MO " is not a legal LAT node name, Using "CISCO_1BB52C"
Aug 30 22:54:46.237: RMI-HAINFRA-INFO: Originating event to Shut all Interfaces
Aug 30 22:54:46.238: RMI-HAINFRA-INFO: Shutting down all interfaces in ActiveRecovery
Aug 30 22:54:46.238: RMI-HAINFRA-INFO: Not shutting down the interface-rmi: Vlan550
.Aug 30 22:54:46.236: %RIF_MGR_FSM-6-RMI_LINK_UP: Chassis 1 R0/0: rif_mgr: The RMI link is UP.
.Aug 30 22:54:46.236: %STACKMGR-1-DUAL_ACTIVE_CFG_MSG: Chassis 1 R0/0: stack_mgr: Dual Active Detection link is available now
.Aug 30 22:54:46.236: %RIF_MGR_FSM-6-RMI_ACTIVE_RECOVERY_MODE: Chassis 1 R0/0: rif_mgr: Going to Active(Recovery) from Active state
.Aug 30 22:54:48.238: %LINK-5-CHANGED: Interface GigabitEthernet0, changed state to administratively down
