06-07-2023 01:32 AM
Hello Friends,
I have a WLC C9800 with the Local EAP configuration, but when the client with the local account, it shows Unable to connect.
I did some troubleshooting and found this logging:
2023/06/07 14:17:33.484807549 {wncd_x_R0-0}{1}: [errmsg] [15175]: (note): %DOT1X-5-FAIL: R0/0: wncd: Authentication failed for client (f8e9.4eae.ac0f) with reason (Cred Fail) on Interface capwap_90000005 AuditSessionID 03FA5D0A0000006C96384712 Username: user1
2023/06/07 14:17:33.484816399 {wncd_x_R0-0}{1}: [auth-mgr] [15175]: (info): [f8e9.4eae.ac0f:capwap_90000005] Authc failure from Dot1X, Auth event fail
2023/06/07 14:17:33.484824401 {wncd_x_R0-0}{1}: [auth-mgr] [15175]: (info): [f8e9.4eae.ac0f:capwap_90000005] Method dot1x changing state from 'Running' to 'Authc Failed'
I already see a post with the same issue as link below but not resolved
Is there anyone have a experience on that?
Thanks much.