12-06-2012 01:24 AM
I recently bought Cisco RV120W-E V01 and insall it in my home (with firmware 1.0.4.10). I want to establish PPTP conection from my notebook (when I am not at home) and to access (through VPN tunnel) to all hosts in my LAN (with no port restrictions). I configured VPN (PPTP) users and I can establish PPTP tunnel from client to RV120W. My traffic to Internet is going through VPN tunnel to RV120W and then out on Internet, and that is fine. What is not fine is that I can not access to any host on my LAN, and that is the main reason why I configured PPTP tunnel. It is not clear to me, when I am reading admin guide, what I have to configure to allow only my tunnel traffic to reach LAN hosts. Any idea how to do this? Thanks.
12-06-2012 05:10 AM
try SSL VPN
12-06-2012 07:09 AM
Hi Martha, on a computer you're trying to reach, try to disable the firewall.
-Tom
Please rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide