Routers - Small Business

How can I open the ports 10k-20k and 5060 for sip phones using RV220w?Also, need to open traffic to sip provider's ip address.Thanks

HalloI have problems with two customers who have the same set of RV180 and Hoste Exchange emails and both mails get stucked and does not receive new mail untill they restart Outlook I have changed the router with one of customers to a netgear router ...

Hi there, We notice that the is no option to control the ports on the 2nd Public IP Address.   All we can do is enable One to One NAT which forwards all traffic from the Public IP to the Internal IP Address.  Unlike the default WAN IP Address, we are...

I have a strange problem with an RV180W Wireless VPN Router.  We use the RV180W as the default gateway and internet access for the LAN, and use it's built-in wireless for one area of the buildling.  We also have an access point connected to the LAN f...

Dear Sir,I have Cisco core switch VS-S720-10G , the problem is the switch is not booting and when connect it to hyper terminal vis console nothing will be appeared please let me know how we can fix this issue can we do RMA ?Best regards

RV320 Verizon Modem List for 2015 and latest RV320 Firmware I need the latest Verizon modem list for 2015. Here is the available Verizon USB Modems available from Verizons website. http://www.verizonwireless.com/wcms/consumer/explore/4g-usb-modems.ht...

Hello everyone, I use ACLs on a daily basis and every now and then I need to insert a remark above a particulare line.As of today I do the following: Step 1: Creating a temp. copy of the desired ACL and bind it to the Interface to ensure functionalit...

Hi ,We have a Cisco RV082 router in our organization. We applied content filter with the keyword 'videos'. I need to override this to allow for only few machines. If this is possible, kindly let me know the steps. Thanks in advance.

I have an RV220W managing my home/home office network. Since it is summer time and my kids have a lot of free time on their hands, I have established some Scheduled Access Rules to regulate their online activities. The rules are set up as scheduled b...

HiI have to make a solution with routers, that have to use the CLNS feature.I want to find which routers and IOS that support that ?I can remember a tools, where I choose the command: CLNS and then it could tell which hardware and IOS that support th...

I have a WRVS-4400N running V: 2.0.0.8 and I have a small webserver behind it for accessing my local database.  All my machines inside the firewall see it fine.  (It is on port 80.)  Outside the firewall, I cannot get to it.  I have port forwarding s...