Cisco RV 120 W- IPsec VPN with dynamic IP address

[andyhoien]

We have a Cisco RV 120 W Wireless N VPN Firewall installed at a users home who has a dynamic WAN IP address.  The office side has a Secure Computing SG300 firewall with a static WAN IP address.  The SG300 firewall supports an IPsec tunnel by host name if the remote end has a dynamic IP.  I am wondering if the RV 120 is capable of acting as an endpoint by host name even though it's IP is dynamic.  Thanks.

[Phillip Remaker]

The RV120 supports dynamic DNS using DYNDNS.org, so if the  SG300 firewall can connect by the dynndns.org DNS name you can make this work.

[andyhoien]

Thanks for the reply Phillip.  The SG300 does support dynamic DNS, I'll give this a try.