DDNS Service Configuration String (RVS4000) for DynDNS.org

[llcckk1509]

Hi all,

Has anyone been able to successfully configure and connect to a DynDNS account with RVS4000?  This was working fine for me until recently when I think I upgraded the firmware to 1.3.3.5.

I am trying to connecting to DynDNS.org service.  In the past, I used the following string for the Hostname which worked:

'mysubdomain.domain.com&system=custom' (including small quotes)

According to the RVS4000 documentation, all you should have to do is specify the host name with DynDNS but this clearly is not accurate.

Any assistance would be appreciated.

Thanks,

Phil

[llcckk1509]

Hi,

Forgot to add that I receive the following grammatically incorrect status:

"HTTP cannot connected". 

Thanks.

Phil

[joachimterasa]

I've got a firmware version 2.0.2.7, which I assume is equivalent to your version and I have never dealt with a special hostname string. For connection to DynDNS.org I have folowing settings in the WAN setup page:

DDNS Service:

Username:

Password:

Host Name:    (without any quotes)

Custom DNS:

Then click and that's it.