How to config SRP547W to support ANNEX M

[nopphanat]

How to config SRP547W to support ANNEX M

[Daniele Giordano]

You must upgrade the firmware version to 1.02.01 MR2:

The following new features and enhancements were added to software version

1.02.01:

• ADSL2 Annex M modulation is now automatically detected by using the

"Multimode" modulation setting.

Regards.

[nopphanat]

Thank you very much for suggestion.

Could you please add link to new firmware 10.02.01 MR2: for dowload.

Reasons to change to ANNEX M bacause when cisco SRP547w connect to internet for one or two day

any client computer can't connect to internet. I check status of wan it stay connect to internet and

interface PVC0 it have public ip address but client not connect to internet. When i ask to ISP customer

service he advice me to change ANNEX type.

best regards.

[Daniele Giordano · Accepted solution]

Download the firmware from here:

http://www.cisco.com/cisco/software/release.html?mdfid=283437659&softwareid=282919993&release=1.02.01&relind=AVAILABLE&rellifecycle=&reltype=latest

Regards.

[nopphanat]

After you upgrade the firmware to version 1.02.01 MR2: and tried to connect to internet

for 4 days ago and found no problems. That should be granted.

Thank you for your help

Nopphanat