MPLS Link

[bwaweru@gmail.com]

What could be the issue when a link connected to interface GigabitEthernet0/0/2.582 does not come up on the production router but works on a test router.

The config on the interface are okay.

ken-nai-edc-pe01#ping vrf voas001 10.234.253.129 rep 50

Type escape sequence to abort.

Sending 50, 100-byte ICMP Echos to 10.234.253.129, timeout is 2 seconds:

...................!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Success rate is 62 percent (31/50), round-trip min/avg/max = 1/1/2 ms

ken-nai-edc-pe01#clear arp-cache vrf voas001 10.234.253.129

ken-nai-edc-pe01#sh arp vrf voas001

Protocol  Address          Age (min)  Hardware Addr   Type   Interface

Internet  10.234.253.128          -   7c0e.ce0d.f603  ARPA   GigabitEthernet0/0/3.582

Internet  10.234.253.129          0   Incomplete      ARPA

ken-nai-edc-pe01#

ken-nai-edc-pe01#ping vrf voas001 10.234.253.129

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 10.234.253.129, timeout is 2 seconds:

.....

The router is also connecting another link which is working fine. 

[ktonev · Accepted solution]

Hello,

Please post your question in the main Routing section. MPLS is not supported on Small Business routers (RV series) so there is less chance for someone to answer you quickly here.

Thanks,

Kris