11-02-2017 04:18 AM - edited 03-21-2019 10:58 AM
Hi!
Is it possible to limit the external access to the management IP/Interface to multiple IPs rather than a single one or a whole subnet?
Our company got several external IPs and we want to limit the access of the WAN management (HTTPS) interface of our customer-routers to these IPs.
I also tried an access rule (WAN1 to WAN1) with an allow rule for https from the concerning external IPs and afterwards a deny rule for any. But this ACL is not even triggerd as i can see from the logs.
Management Access from WAN (Basic Settings: Allowed Remote IP Addresses: Any IP Address) is activated. Firmware of RV340 is 1.0.01.17
Any suggegstions?
Thank you,
Woger
12-22-2017 07:56 AM
Hi, My name is Iliya Gatsev from Cisco Technical Support Team.
Please open a case with Cisco Technical Support. Here is the contact of the technical support :
https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Iliya Gatsev
Cisco TAC Network Engineer
Together we are the human network .:|:.:|:. CISCO
12-27-2017 12:49 AM
Hello Iliya!
I have already opened a case to this issue 2 months ago. You are the engineer working on that ;-)
Any news regarding a new firmware supporting this function?
Thank you and Best Regards,
Christian
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide