I have brought new rv016 with 3.0.0.19tm
and I use 4 adsl lines
Problem I found in this version is :
1. when I configure bandwidth manager to choose which line each port will be out
my speed down to 400kbp/s only (but when disable(delete all setting) my speed is 3000kbp/s)
2. in log system (when I want to see usage of each line) it always show I use all line in 100% in downstream, if I configure bandwidth manager it show that i use 100% all line but my speed only 400kbp/s
But in another rv016 with firmware v.2.0.10 ( I brought 3 years ago)
I can use bandwidth manager with my full speed (3000kbp/s)
and log system tell quite correct in each line (refer to my ISP service)
and when I want to use V.2 firmware (I get 2.0.3 firmware from my friend), still hv problem when I upgrade firmware to V.2.0.0 it say when I use program
as "invaid firmware".
So I need some help from cisco'staff to provide the firmware(V. 2.0.10) by email me or give a link to download and give me instruction to do it also
or If someone have same problem with me, and can solve please reply me soon.
Thank you
Kittipong Thiensathaporn
P.S. I not good in english but I try my best to communicate with yours