RV016 (V3) tcp and udp outgoing traffic issue

[NICOLAS VENIEL]

Hi everyone.

I've got a CISCO RV016 connected to a tooway SAT modem and need  to reach another router connected in DSL

I need to make a TCP connection on port 8080 with my audio codec to reach the other side, and get audio.

I do not feel comfortable with all the security process, firewall, forwarding port and so on ...

What do I need to do to make the RV016 let the TCP out ?

do I need to create rules ?  do I need to modify the firewall factory settings ?

does UDP outgoing traffic need some rules too ?

Thank's for your help.

Nicolas.

System Information

Serial Number :  NKS16450006

Firmware Version :  v4.2.1.02 (Jan 18 2012 14:10:55)

PID VID :  RV016 V03

Firmware MD5 Checksum :  a9817f2dbdcbd6a5c109eaa21b1c3545

LAN  Working Mode :  Gateway

[jonatrod]

Hi Nicolas, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. If you want other method instead forwarding I could advise you One-to-one NAT. I will share a document to you regarding this configuration.

http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=544

I hope you find this answer useful

“Please rate useful posts so other users can benefit from it”

Greetings, 
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.