Hello,
I have a RV042 Dual Wan. Two internets balanced wow! who would've thought that the headaches were waiting patiently right down the corner.
I was working with a 2wire Gateway that came with my ISP. I was able to open the ports in order to have public access for my students and teachers to upload their work. All I had to do was to allow my server ip address to have access to different ports blocked by the ISP. I used
http://www.canyouseeme.org/ in order to verify if my port was open.
I bought the RV042 for various reasons like excellent content blocking, load balancing, quick vpn, among other. But I just can't open the port 80 while having having my two ISP connected with load balancing, not even while having only one modem connected.
I have resolved many issues using the protocol binding. I have tried everthing. I just don't undertand something.
Whenever I connect my server to my old router, "www.canyouseeme.org" tells me that my port 80 is open.
Whenever I connect my servet to the RV042-DW, my port appears closed.
So it's not any OS issues.
I've tried:
- To forward the TCP 80~80 port to my server static ip address... but failed
- To enable UPnP function with the same port... but failed
- To configure the port triggering with the same port.. but failed.
- To disable the firewall.. but failed.
- To use transparent bridge in the WAN1 with my 2wire Gateway... but failed
- To set up an account in DNS.ORG already had one, everythings is in green.. but failed.
- To change the configuration in my old 2Wire Gateway router to allow a DMZ zone so all ports are public... but failed.
- To assign RV042 router ip address in my old 2Wire allowing that specific address to allow certain ports to be public... but failed.
I have the Firmware v4.0.4.02 from DEC/11
HELP!
http://www.youtube.com/watch?v=TU7JjJJZi1Q
