Routers - Small Business

Good afternoon, our company started out very small and is now growing very large to the point where I am looking at layering hosts to obtain more segregation and security for different areas/users within the company. I've been playing around with the...

Hello!I'd like to enable client to router VPN connections. I have a question how to make any sucessful VPN  connection to RV220W. From all the tests I made only SSL VPN on Windows XP x86 client machine was working.For IPSec VPN I always receive this ...

I just purchase the Cisco Router RVS4000 vpn and I am having problem configuring the VPN option.  I just try all way I could imaging, but somehow something are missing and I don't know what it is.  Here are a image of my current configuration.No matt...

I've been trouble shooting bandwidth issues for the past 2 weeks and I've reached a point where I need some advice. We have 2 dsl lines coming in and the modem is in bridge mode while the router handles the pppoe information. Each line is 6mb down an...

My current Linksys router WRV54G hasHardware Version : Rev. 02Software version: 2.36It is always disconnecting itself so often from the cable modem. Sometimes it recovers itself but in general does not.As far as i looked up from diferent forums for l...

I have two RV082 (hardware version 2, firmware 2.0.2.01-tm) routers at two different sites in town. I am trying to get the gateway to gateway VPN connection to work reliably.  After I first connect the tunnel all works well for about 1 minute.  I can...

I keep getting email with messages like that below in it from the router. It appears these are not documented anywhere. Anyone have a clue? Jan 18 09:35:36  - have_expectations(c1ee80e0) Jan 18 09:35:36  - exp_entry ! &ct->sibling_list.

Hi,Just been upgraded to 50Mbps Broadband, but I can only achieve 22Mbps with IPS enabled.Is this a know problem?Is there a work around, instead of just disabling IPS?Clearly if I cant get this fixed I'll be going elsewhere for my router :(Regards.

So I don't know how old this router is; it's fresh from the package, but I bought it second-hand. But if anyone out there has knowledge that might be able to help me. . .The router doesn't maintain its internet connection. There's an 'internet' light...

Hi everyone,I have a Linksys RV042 Router. Its WAN 1 link is not working. I have been using in the SMART LINK BALANCING mode from last 18 months. All of a sudden the wan 1 link is not working at all. I have checked it by swapping my ISP cables. Wan 1...

Hola, tengo un DLS Router ZTE que me dejo telefonia ( lo pedi con IP FIJA)y por otro lado tengo un RV042 de Cisco que compramos para hacer balanceo de trafico y VPN.Tengo varias dudas para poner en marcha el RV042 y son las siguientes:- LA IP publica...

Summary:Using a Option iCON322 modem the 3G backup connection is not connecting after removing Ethernet WAN. The exact same configuration (using the same 3G SIM) is working using a Sierra Wireless Compass 885 modem.Setup:- all factory default expect:...

Hi have have rv120w and it has issues mantain connectivity it is not all connections at once and I can reanable  the connection more less instantaneously after it has happened. so it does not loose the connection to my isp all together. It has gone o...

hi there i have a demroom set up which includes a sr520 as the edge router connecting to the ISP and i have a uc 560 connected to that which is working finei also have a new business edition 3000 and a 800 series router which im looking to connect to...

Hello,I've a RV120W with the last firmware version (june 2011), i want to create two vpn tunnel:- Professional: lan routing all packet for the 192.168.0.0/24 to the first VPN tunnel- Other: all other address IP destination to a second VPN tunnelThe f...