cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2592
Views
0
Helpful
6
Replies

RV042 Quick VPN Issue

edtetz
Level 1
Level 1

So here is my issue. I have two sites, each with a Linksys RV042 on thier site.

Site 1:

External: 142.142.142.142

Internal: 192.168.25.0/24

Site 2:

External: 143.143.143.143

Internal: 192.168.26.0/24

We have setup a site-to-site VPN between these sites, and all traffic is running back and forth without isse.

At Site 1 we have configured the Client VPN for use with the QuickVPN software. Again, for site 1, this is not an issue. We are able to access all internal resources at Site 1 without issue (expect for some DNS related problems).

The problem that we have is attempting to access Site 2 resources via the QuickVPN connection at Site 1. Even though they are not suppose to exist, we are able to ping 192.168.26.1-6 (which are ghost addresses likely created by the RV042's) but no actual systems on at Site 2.

I have added the Client VPN connection at Site 2, but it has the same problem accessing resources at Site 1.

Thanks for any help you have.

-ed

6 Replies 6

David Carr
Level 6
Level 6