02-12-2015 12:49 PM
I installed a rv082 router and tried to make a connection to the Internet via PPPoE, but it did not work. I followed all the steps of installation and configuration [including mac address cloning]. Below I put some logs and configruation, can anyone help me fix it?
Thank you in advance!
Feb 12 21:14:06 2015 | Connection Refused - Policy violation | UDP 10.30.4.68:137->10.30.7.255:137 on ixp1 |
Feb 12 21:14:06 2015 | System Log | [pppoe] init_ses: creating socket |
Feb 12 21:14:06 2015 | System Log | [pppoe] sending PADI --- |
Feb 12 21:14:06 2015 | System Log | [pppoe] receiving PADO |
Feb 12 21:14:06 2015 | System Log | [pppoe] HOST_UNIQ successful match |
Feb 12 21:14:06 2015 | System Log | [pppoe] sending PADR |
Feb 12 21:14:06 2015 | System Log | [pppoe] receiving PADS |
Feb 12 21:14:06 2015 | System Log | [pppoe] HOST_UNIQ successful match |
Feb 12 21:14:06 2015 | System Log | [pppoe] Got connection: b9 |
Feb 12 21:14:06 2015 | System Log | [pppoe] Connecting PPPoE socket: 00:15:17:19:5c:4d 00b9 ixp1 |
Feb 12 21:14:06 2015 | System Log | [pppoe] Connecting PPPoE socket: 00:15:17:19:5c:4d 00b9 ixp1 |
Feb 12 21:14:07 2015 | Connection Refused - Policy violation | UDP 10.30.5.75:137->10.30.7.255:137 on ixp1 |
Feb 12 21:14:07 2015 | Connection Refused - Policy violation | UDP 10.30.5.75:137->10.30.7.255:137 on ixp1 |
Feb 12 21:14:08 2015 | Connection Refused - Policy violation | UDP 10.30.0.231:53378->239.255.255.250:1900 on ixp1 |
Feb 12 21:14:08 2015 | Connection Refused - Policy violation | UDP 10.30.0.231:53378->239.255.255.250:1900 on ixp1 |
Feb 12 21:14:09 2015 | Connection Refused - Policy violation | UDP 10.30.5.88:137->10.30.7.255:137 on ixp1 |
Feb 12 21:14:09 2015 | Connection Refused - Policy violation | UDP 10.30.5.88:137->10.30.7.255:137 on ixp1 |
Feb 12 21:14:10 2015 | Connection Refused - Policy violation | UDP 10.30.1.78:137->10.30.7.255:137 on ixp1 |
Feb 12 21:14:10 2015 | Connection Refused - Policy violation | UDP 10.30.1.78:137->10.30.7.255:137 on ixp1 |
Feb 12 21:14:11 2015 | Connection Refused - Policy violation | UDP 10.30.0.231:53378->239.255.255.250:1900 on ixp1 |
Feb 12 21:14:11 2015 | System Log | [ppp0] : Authentication fail ! |
Feb 12 21:14:11 2015 | System Log | [pppoe] sending PADT |
Feb 12 21:14:11 2015 | System Log | [pppoe] sending PADT |
02-24-2015 06:14 PM
Something has to be wrong on your credentials--there's almost nothing but those to configure PPPoE.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide