RV082 NAT to other subnets.

[tom]

Is it possbile to NAT to other subnets with the RV082. It is on a 192.168.41.x and I have a phone system on a 192.168.20.x. Any way i can do this? After searching all over others are saying no.

[mpyhala]

Hi Tom,

Thank you for posting. On the Setup-> Network page you can select Multiple Subnet and add 192.168.20.x to the router.

[tom]

Yes I see that but I can only add an IP to the router (192.168.20.1 255.255.255.0) I want to add the subnet IE 192.168.20.0 255.255.255.0, without assigning one IP to the router.

[mpyhala]

Tom,

That is how you add a subnet, by adding an IP to the router. Add 192.168.20.1/24 and the router will have both LAN subnets. You cannot add a subnet without adding an IP to the router.

[Te-Kai Liu]

Please be reminded that additional access rules may be required if you have RV0xx V3 router. Check the firmware release note for details.