Solved: RV130 laggy GUI response

rockysfng · ‎04-03-2015

My RV130 having laggy GUI response no matter access via LAN, WAN, http, https.

Sometimes it does not response after a moment (not a matter inactivity timer, set to 30 minutes) and required to log-in again.

Is it a bug?

Dan Miley · ‎04-06-2015

Hi Rocky,

these routers are designed for throughput, not for administrative interface performance, but you should not see timeouts,

what firmware are you using? can you update or reflash it with the latest firmware? that would refresh the executable, and all system files.

1.0.1.3 is the latest, here: https://software.cisco.com/download/type.html?mdfid=285026141&i=rm

have you looked at the logging or system summaryto see if there are attacks going on, or high cpu use?

also are there any switches or other routers in your topology that might be impacting this router?

Dan

rockysfng · ‎04-05-2015

I hope there sesssion_id will appear in the URL such that reloading the page does not require to sign on again.

Dan Miley · ‎04-06-2015

Hi Rocky,

these routers are designed for throughput, not for administrative interface performance, but you should not see timeouts,

what firmware are you using? can you update or reflash it with the latest firmware? that would refresh the executable, and all system files.

1.0.1.3 is the latest, here: https://software.cisco.com/download/type.html?mdfid=285026141&i=rm

have you looked at the logging or system summaryto see if there are attacks going on, or high cpu use?

also are there any switches or other routers in your topology that might be impacting this router?

Dan

rockysfng · ‎04-15-2015

It is found that the CPU load was very high with port based QoS enabled.

I believe this is the cause. I try to turn off QoS and see what happen

rodolfof22 · ‎05-15-2016

Hi,

I have the same issue using the last firmware (1.0.3.14). What are the procedure to disable QoS?

Thks!