RV160 site to site IPsec - 2 remote subnet - how-to?

[MKITW]

We have multiple RV130 in use with site-to-site vpn

HQ network has more than 1 subnet (1x class c 192.168.x.x and 1x class B 172.16.x.x)

working fine with RV130 Phase1 and 2x Phase2 configured.

New we need to migrate to RV160  because RV130 is out of support.

RV160 with one subnet (192.168.x.x) is working fine.

How I can add the second subnet (172.16.x.x)?

[balaji.bandi · Accepted solution]

As per the documetn below should work. (test and advise)

In the Site- to Site VPN Section

Local Group Setup Section

Local IP Type Select ( Select IP Gorup) add Group IP in that Group